AMI81.jpg

Small Pipe Diameter Weld Head
   and Guide Rings

The Model 81 in its standard configuration will weld pipe from 1.9" OD to 5.563" OD with as little as 1.750" radial clearance and 6.325" axial clearance. Our unique clamping assembly increases production rates by minimizing the mounting and dismounting times of the weld head to as little as 30 seconds each. Compatible with the AMI Model 227 and Model 415 Power Supplies.

 

For rental rates & availability contact
Joe Smith at

704-967-0187 or


Specifications

 
  • Arc Voltage Control: 0.750" (19 mm)
  • Travel Speed: 0.1 to 10 IPM (2,5 - 250 mm/min.)
  • Wire Feed Speed: 1.0 to 100 IPM (25 mm - 2540 mm/min.)
  • Torch: Water-cooled, 200 A DC, 100% Duty Cycle (standard)
  • Torch Adjustments: Adjustable lead/lag 15 degrees tilt in/out      15 degrees
  • Tungsten Size: 3/32" or 1/8" (2,4 mm or 3,2 mm)
  • Torch Cross-seam Steering Range: 0.625" (16 mm)
 
  • Torch Oscillation Amplitude, Max.: 0.500" (13 mm)
  • Wire Manipulator: Vert, horiz and (manual adj.) angular
  • Filler Wire Size: 0.030" - 0.035" (0,8 mm - 0,9 mm)
  • Axial Clearance: 6.325" (minimum) (160 mm)
  • Radial Clearance: 1.75" (minimum) (45 mm)
  • Wire Spools: 0.5 lb. special spool (0,2 kg) /
         other sizes available
  • Weight: 6 lbs. (less cables) (2,7 kg)