AMI79.jpg

Full-Function Weld Head

Each Model 79 Weld Head features Arc Voltage Control (AVC) for precise arc gap control, programmable oscillation (weaving) and a precision wire feeder and wire entry mechanics. All Model 79 Weld Heads operate using the GTAW (TIG) process and will accommodate a range of pipe sizes from 0.75" OD to 6.625" OD (19 mm to 170 mm) and wall thicknesses up to 0.75" (19 mm).

 

For rental rates & availability contact
Joe Smith at

704-967-0187 or


 

 Model 79-2375

WALL THICKNESS: up to 0.44" / 11 mm
ROTATION SPEED: 0.1-5.0 RPM
TORCH - WATER COOLED: 200 A continuous Duty Cycle
TORCH ADJUSTMENTS: LEAD/LAG: +/- 5 degrees
CROSS-SEAM: +/-0.25" (6,35 mm)
TILT IN/TILT OUT: 15 degrees/45 degrees
WIRE FEEDER: Integral, cable mounted 5-100 IPM
WIRE SPOOL SIZE: 2 Ilbs, (4") standard, 0,9 kg, (101,6 mm)
FILLER WIRE SIZE: 0.030" or 0.035" (0,75 mm or 0,9 mm)

 

Model 79-3500

WALL THICKNESS : up to 0.44" / 11 mm
ROTATION SPEED: 0.05-2.0 RPM
TORCH - WATER COOLED: 200 A continuous Duty Cycle
TORCH ADJUSTMENTS: LEAD/LAG:  +/- 10 degrees
CROSS-SEAM: +/-0.375" (9,35 mm)
TILT IN/TILT OUT: 15 degrees/45 degrees
WIRE FEEDER: On-board 5-100 IPM
WIRE SPOOL SIZE: Low-profile standard 2 Ilbs.,
      (4") optional 0,9 kg, (101,6 mm)

FILLER WIRE SIZE: 0.030" or 0.035" (0,75 mm or 0,9 mm)


 

Model 79-6625

WALL THICKNESS: up to 0.75" / 19 mm
ROTATION SPEED: 0.5-2.0 RPM
TORCH - WATER COOLED: 200 A continuous Duty Cycle
TORCH ADJUSTMENTS: LEAD/LAG: +/- 10 degrees
CROSS-SEAM: +/-0.375" (9,35 mm)
TILT IN/TILT OUT: 15 degrees/45 degrees
WIRE FEEDER: Integral, cable mounted 5-100 IPM
WIRE SPOOL SIZE: 2 Ilbs, (4") standard, 0,9 kg, (101,6 mm)
FILLER WIRE SIZE: 0.030" or 0.035" (0,75 mm or 0,9 mm)