AMI227.Supply.jpg

227 Power Supply

The model 227 is a 100/225 A pre-programmed/programmable, inverter-type, GTAW welding power supply and controller designed for (but not limited to) automatic orbital welding applications that require the addition of filler material.

Compatible AMI weld heads:

Fusion weld heads without filter wire - Model 96, Model 6, Model 8 series and Model 9 series.

Pipe weld heads with filler wire - Model 81 and Model 15

Open-frame weld heads with or without filler wire - Model 79 series and Model 95 series.

 

For rental rates & availability contact
Joe Smith at

704-967-0187 or


Specifications

 
  • Overrides: Programmable from 0% to 100%
  • Weld Current: 3 to 100 A DC @ 100/120 VAC input,
       100% Duty Cycle
  • 3 to 225 A DC @ 200/240 VAC input, 100% Duty Cycle
  • Current Accuracy: plus/minus 1%
  • Travel/Rotation Speed: range depends on weld head type,
       typically 0.5 to 10 RPM or 0.1 to 20 IPM
  • Cooling System: Water cooling unit available
  • Wire Feed Speed: Range depends on weld head size,
       typically 0 to 200 IPM
 
  • Input Power: 100 to 240 VAC, plus/minus 10%,
       Single phase 50/60 Hz
  • Dimensions

                             H: 15" (381 mm)

                             W: 23" (584 mm)

                              L: 20" (508 mm)

  • Weight: 88 lbs. (37 kg)